SAKO OPTILOCKTM BASES AND RINGS
Optilock bases and rings are machined from a solid block of steel, Cr-Mo alloy or stainless, just like our rifles. The front bases have a solid angled left side and a similarly angled right side with a clamping device. This base design connected to Sako rifle´s integral dovetail rail allows you to adjust the horizontal position of the scope objective end without touching the scope adjustment.
Optilock rings are available in four heights and two diameters: 25,4 (1 in) and 30 mm to fit any scope. The inner scope saver ring is made of polymer and acts as a ball bearing to prevent the scope tube from being deformed.
The scope mount bases are available in four models for Sako and two for Sako TRG-22/42 rifles. Choice of right base model depends on action length, scope tube length and eyerelief that is needed. Optilock Weaver base makes the use of Optilock rings possible in all rifles with Weaver or Picatinny rails.
SAKO OPTILOCK MOUNT BASES FOR MOUNT RINGS
| Base Type | Rifle |
|---|---|
| Sako Short | L461 / L579, S491 / M591, Sako 75, Sako 85 |
| Sako Long | L61R / L691, TRG-S, Sako 75, Sako 85 |
| Sako Extended | L61R / L691, TRG-S, Sako 75, Sako 85 |
| Weaver | Sako TRG with Picatinny rail, Weaver rail |
SAKO OPTILOCK MOUNT RINGS FOR MOUNT BASES
| Ring type | Tube diameter (d) mm |
Mount height (H) |
Scope max. outer diameter (D) mm |
|
|---|---|---|---|---|
| mm | ||||
| 1" XTRA LO 1" XTRA LO S/S |
25.4 / 26 | Extra Low | 28.5 | 51...59 |
| 1" LO 1" LO PHO 1" LO S/S |
25.4 / 26 | Low | 30.5 | 55...63 |
| 1" ME 1" ME PHO 1" ME S/S |
25.4 / 26 | Medium | 35.5 | 65...73 |
| 1" HI | 25.4 / 26 | High | 40.5 | 75...83 |
| 30 mm XTRA LO 30 mm XTRA LO S/S |
30 | Extra Low | 30.5 | 55...63 |
| 30 mm LO 30 mm LO PHO 30 mm LO S/S |
30 | Low | 32.5 | 59...67 |
| 30 mm ME 30 mm ME PHO 30 mm ME S/S |
30 | Medium | 36.5 | 67...75 |
| 30 mm HI | 30 | High | 40.5 | 75...83 |
| 34 mm LO PHO | 34 | Low | 35.5 | 69...77 |